Summary

Compact inflatable plunge with a 0.8 HP chiller that heats and cools from 35°F to 107°F. Drop-stitch PVC, ozone sanitation, and Wi-Fi control support fast setup and small-space use at home.

Overview

The Revive Inflatable Barrel Plunge pairs a rigid drop-stitch body with a 0.8 HP dual-mode chiller for cold or warm sessions. You inflate the tub, connect the hoses, and set temperature on the app or control panel. Ozone and dual-stage filtration help keep water clear. Use indoors or outdoors on a level, load-rated base and store the system easily when not in use.

Installation Notes

• Set on a level, load-rated surface
  
• Inflate the tub until fully firm
  
• Connect hoses securely
  
• Fill with clean water
  
• Plug into a dedicated 120 V GFCI outlet
  
• Set temperature on the panel or app
  
• Wait for temperature to stabilize before entry

Care & Maintenance

• Check temperature with a thermometer before each use
  
• Clean or replace filters on schedule
  
• Balance water chemistry regularly
  
• Inspect hoses, seals, and inflatable walls often
  
• Keep covered when idle
  
• Drain, dry, and store in a shaded, dry area

Safety Information

• For wellness use only
  
• Seek guidance if you have heart, blood pressure, or respiratory issues, cold sensitivity, pregnancy, or recent surgery
  
• Never use alone or under alcohol or medication
  
• Limit time to comfort and experience
  
• Exit at once if dizzy, faint, or short of breath

Specifications

• Temperature Range: 35°F–107°F
  
• System: 0.8 HP heating and cooling
  
• Construction: UV-resistant drop-stitch PVC
  
• Filtration: dual-stage with ozone generator
  
• Control: Wi-Fi app for temperature and scheduling
  
• Setup Time: about fifteen minutes
  
• Electrical: 120 V GFCI circuit
  
• Included: insulated cover, quick-connect hoses, app setup guide
  
• Use: home gyms and small wellness spaces

Key Features & Benefits

Features

• Dual-temperature system
  
• Quiet 0.8 HP chiller
  
• Ozone and dual-stage filtration
  
• Wi-Fi control
  
• Drop-stitch PVC build
  
• Insulated cover with straps

Benefits

• Use one setup for hot or cold sessions
  
• Keep water clean with simple upkeep
  
• Adjust temperature remotely
  
• Fit in small indoor or outdoor areas
  
• Complete setup fast and store with ease

Temperature Guidance

Cold Therapy

• Beginner: 60–65°F for 30 seconds–2 minutes
  
• Intermediate: 50–60°F for 2–5 minutes
  
• Advanced: 40–50°F up to 10 minutes with clearance
  
• Avoid below 40°F without supervision

Hot Therapy

• 95–100°F for comfort
  
• 100–104°F for 10–15 minutes
  
• 104–107°F for 5–10 minutes with hydration

Disclaimer

For wellness use only. Not medical equipment. Follow all setup, electrical, and safety instructions and use only with a grounded GFCI outlet.