5000VA line interactive UPS system for server, network and telecommunications equipment. 5kVA UPS with internal batteries installs in only 3 rack spaces with a depth of only 635mm / 25 inches. High 98% line-power efficiency rating reduces energy consumption and BTU heat output. Expandable battery runtime with optional BP48V24-2U (limit 1), BP48V60RT-3U (multi-pack compatible) and BP48V27-2US (multi-pack compatible) external battery packs. Uninterruptible Power Supply (UPS) switches to battery-derived AC output during power failures and extreme voltage variations. Line interactive Automatic Voltage Regulation (AVR) offers voltage boost during brownouts and voltage reduction during overvoltage conditions to maintain regulated 230v output over an input range of 170-282V. Supports hardwire input. Includes C19 and C13 output receptacles. Network-grade AC surge and noise suppression. Network management interfaces support communications via USB, DB9 serial and slot for network management card options. Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces at once. PowerAlert UPS monitoring software is available via free download. Emergency Power Off (EPO) interface. 3-stage metered current monitoring and battery charge status LEDs. Utility power and voltage regulation LEDs. Audible alarm. Self-test. 4-post rackmount installation accessories included; 2-9USTAND tower kit and 2POSTRMKITHD two post rack mounting accessories available. Field-replaceable, hot-swappable internal batteries and external battery packs.

Features

• 5000VA/3750 watt max. output power capacity compatible with International 230V input voltage
• 3U rack/tower UPS installs in standard 19 inch rack enclosures with an installed depth of only 635mm / 25in
• Protects sensitive networking equipment from blackouts, voltage fluctuations and transient surges
• Line Interactive Automatic Voltage Regulation (AVR) corrects 230V nominal input from 170 to 282VAC to usable 230V levels without consuming battery power
• AVR circuits boost undervoltages from 170 to 199V by 12% and reduce overvoltages from 245 to 282V by 12%
• Network interfaces support simultaneous communications via USB, DB9 serial or contact closure and slot for network management card options
• Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX and SNMPWEBCARD
• USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from poweralert
• Built-in Emergency Power Off (EPO) interface with cable
• Sine wave output in AC and battery mode
• Expandable runtime with optional BP48V24-2U (limit 1), BP48V60RT-3U (multi-pack compatible) and BP48V27-2US (multi-pack compatible) external battery packs
• Half/full load runtime of 20/8.5 minutes with internal batteries
• Intelligent battery management system extends battery life
• Includes 11 output receptacles (3 C19/8 C13)
• Hardwire input AC connection
• 3 stage metered LEDs offer current monitoring and battery charge level
• Mains power and voltage regulation LEDs offer at-a-glance power status information
• Front panel switches support self-test and alarm cancel functions
• Included adjustable mounting rails support installation in 4 post 19 inch racks
• Supports upright tower placement with optional 2-9USTAND accessory
• CE, GOST, SASO listed

Package Includes

• UPS system
• USB, DB9 and EPO Cabling
• Mounting hardware for 4 post rackmount installation
• Warranty information
• Instruction manual

Specifications

OVERVIEW

• UPC Code: 037332121455
• UPS Type: Line-Interactive

OUTPUT

• Output Volt Amp Capacity (VA): 5000
• Output kVA Capacity (kVA): 5
• Output Watt Capacity (Watts): 3750
• Output kW Capacity (kW): 3.75
• Power Factor : 0.75
• Nominal Voltage Details: 230v nominal inverter output voltage
• Frequency Compatibility: 50 / 60 Hz
• Frequency Compatibility Details: Automatic frequency selection
• Output Voltage Regulation (Line Mode): -17%, +8%
• Output Voltage Regulation (Battery Mode): +/- 5%
• Included Output Power Cables: Includes 3 C13 to C14 output power cables
• Output Circuit Breakers: 15A (x3) breaker supports 1 C19 outlet each, 10A (x2) breaker supports 4 C13 outlets each
• Output AC Waveform (AC Mode): Sine wave
• Output AC Waveform (Battery Mode): Pure Sine wave
• Nominal Output Voltage(s) Supported: 220V; 230V; 240V
• Output Receptacles: (8) C13; (3) C19
• Individually Controllable Load Banks : No

INPUT

• Rated input current (Maximum Load): 27A
• Nominal Input Voltage(s) Supported: 230V AC
• UPS Input Connection Type: Hardwire
• UPS Input Connection Description: Hardwire input supports International 230V input (L, N, PE)
• Input Phase: Single-Phase

BATTERY

• Full Load Runtime (min.) : 8.5 min. (3750w)
• Half Load Runtime (min.) : 20 min. (1875w)
• Expandable Battery Runtime: Extended runtime supported via optional external battery packs
• External Battery Pack Compatibility : BP48V24-2U (limit 1); BP48V60RT-3U (multi-pack compatible); BP48V27-2US (multi-pack compatible)
• DC System Voltage (VDC): 48
• Battery Recharge Rate (Included Batteries): Less than 4 hours from 10% to 90% (typical, full load discharge)
• Internal UPS Replacement Battery Cartridge: RBC94-3U (quantity 3)
• Battery Access: Front panel battery access door
• Battery Replacement Description: Hot-swappable, user replaceable batteries
• Expandable Runtime: Yes
  

VOLTAGE REGULATION

• Voltage Regulation Description: Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 170 to 282
• Overvoltage Correction : Input voltages between 245 and 282 are reduced by 12%
• Undervoltage Correction : Input voltages between 170 and 199 are boosted by 12%

USER INTERFACE, ALERTS & CONTROLS

• Switches: 2 Switches control off/on power status and alarm-cancel/self-test operation
• Alarm Cancel Operation: Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status
• Audible Alarm: Audible alarm indicates power-failure, overload and low-battery conditions
• LED Indicators: 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status

SURGE / NOISE SUPPRESSION

• UPS AC Suppression Joule Rating: 480
• UPS AC Suppression Response Time: Instantaneous
• EMI / RFI AC Noise Suppression : Yes

PHYSICAL

• Cooling Method: Fans
• Installation Form Factors Supported with Included Accessories: 4 post 19 inch rackmount
• Installation Form Factors Supported with Optional Accessories: 2 post rackmount ( 2POSTRMKITHD ); Tower ( 2-9USTAND )
• Minimum Required Rack Depth with External Battery Pack (cm): 81
• Minimum Required Rack Depth with External Battery Pack (in.): 32
• Minimum Required Rack Depth without External Battery Pack (cm): 72
• Minimum Required Rack Depth without External Battery Pack (in.): 28.5
• Primary Form Factor: Rackmount
• Primary UPS Depth (mm): 635
• Primary UPS Height (mm): 132
• Primary UPS Width (mm): 445
• Rack Height: 3U
• Shipping Dimensions (hwd / cm): 28.58 x 57.20 x 80.01
• Shipping Weight (kg): 82.55
• UPS Housing Material: Steel
• UPS Power Module Dimensions (hwd, cm): 13.21 x 44.45 x 63.50
• UPS Power Module Weight (kg): 64.86
  

ENVIRONMENTAL

• Operating Temperature Range: +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
• Storage Temperature Range: +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
• Relative Humidity: 0 to 95%, non-condensing
• AC Mode BTU / Hr. (Full Load) : 271
• Battery Mode BTU / Hr. (Full Load) : 1267
• AC Mode Efficiency Rating (100% Load): 98%
• Audible Noise: 45 dBA maximum, front side 1m

COMMUNICATIONS

• Network Management Cards: SNMPWEBCARD ; TLNETCARD ; WEBCARDLX
• Network Monitoring Port Description: Supports detailed monitoring of UPS and site power conditions
• PowerAlert Software: For local monitoring via the UPS's built-in communication ports, download PowerAlert Local software at poweralert
• Communications Cable: USB and DB9 cabling included
• WatchDog Compatibility: Supports Watchdog application, OS and hard-reboot restart options for remote applications
• Communications Interface: USB; DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface

LINE / BATTERY TRANSFER

• Transfer Time : 7 ms (AC to Battery); 1 ms (Battery to AC) typical
• Low Voltage Transfer to Battery Power (Setpoint): 170
• High Voltage Transfer to Battery Power (Setpoint): 282

SPECIAL FEATURES

• Grounding Lug: Back panel grounding lug
• Cold Start (Startup in Battery Mode During a Power Failure): Cold-start operation supported
• High Availability UPS Features: Hot swappable batteries
• Green Energy-Saving Features: Greater than 95% efficiency - GREEN UPS

CERTIFICATIONS

• UPS Certifications: CE
• UPS Certification Details: Class A (EMI)