Built for Aussie HVAC pros, the Mastercool Raptor Refrigerant Leak Detector with UV Blue Light (model 56200 series) gives you fast, accurate leak pin-pointing across CFC/HCFC/HFC systems. It’s the go-to when you want fewer call-backs and quicker diagnostics—too easy.

• Who it’s for: Licensed HVAC/R techs, apprentices, and contractors servicing split systems, ducted units, chillers, and commercial refrigeration.
• Why it helps: Microprocessor control + built-in UV torch = double confirmation of tricky leaks. Fair dinkum time saver.

Key Features & Trade Benefits

• Digital Signal Microprocessor → Stable sensing with smart filtering so you can track leaks faster around joints and valves.
• 6 Sensitivity Levels (15 detection steps) → Dial in for noisy plant rooms and windy rooftop days without false alarms.
• Detects to 1/10 oz/yr → Pinpoints tiny losses before they become warranty dramas.
• Built-in Ultra-Bright UV/Blue LED → Electronic + UV dye confirmation for stubborn leak paths—no mucking about.
• Visual Leak Level Indicator + Variable Audible Alarm → See and hear leak size, handy in loud plantrooms.
• Flexible 16″ (43 cm) probe → Reach tight coil bays and behind condensers without kinking.
• Battery test, mute, reset, keypad controls → Quick checks and quiet operation inside apartments or offices.

Why This Product Matters

On a steamy Brisbane arvo, a tech was chasing a pressure drop on an R410A cassette. Soap bubbles showed nothing. He switched the Raptor to a higher sensitivity, traced the hiss at a flare hidden behind insulation, then flicked on the UV light to confirm dye fluorescing—job done in minutes, customer happy, no call-back. Ripper.

Build out your kit with our Leak Detectors range (category page) for team standardisation and search-friendly internal linking.

Pro Tip

Always reset the detector away from the suspected leak, then approach slowly. Shield the tip from cross-winds on rooftops—your readings will stabilise quicker and you’ll nail the leak first go.

Compatibility & System Info

• Refrigerants: Detects all common CFCs, HCFCs, HFCs (e.g., R22, R134a, R404A, R410A, R32 blends).
• Compliance: Meets/exceeds SAE J1627 leak detection performance.

Local jobsites: From salty coastal installs in Perth to high-rise plantrooms in Melbourne CBD, the UV+electronic combo cuts through tricky conditions—no worries.

What’s Included

• Raptor Refrigerant Leak Detector with UV/Blue light
• UV safety glasses
• Sensor tip (factory installed)
• Blow-moulded carry case
• 2 × “C” batteries

Specifications

Warranty & Returns

Backed by our standard trade warranty and hassle-free returns for unopened/unused items (mis-ship or DOA covered). For warranty claims, keep your tax invoice and contact our team. Use must comply with Australian refrigerant-handling requirements.

FAQs

Will it pick up small R32/R410A leaks in split systems?

Yes—its sensitivity and visual bar graph help you hone in around flares, service valves, and brazed joints. For ultra-tiny leaks, confirm with UV dye for a belt-and-braces approach. Pair with Errecom Brilliant UV Dye Pack.

How do I confirm a suspect spot?

Use the built-in UV/Blue light to scan for dye after dosing and run-time. If you want IR sensitivity and numeric sizing, consider the Fieldpiece DR82 IR Leak Detector as a complementary tool.

What replacement parts are available?

Sensor tip and UV bulb are replaceable. Keep a spare sensor on the truck for busy weeks. (Manufacturer part refs: Sensor tip 55100-SEN; UV bulb 53515-B.)

What else should I carry for pressure testing?

A quality nitrogen regulator speeds up diagnostics and confirms repairs. See our High-Precision Nitrogen Regulator.

Related Products

• Errecom Brilliant UV Dye Kit – Helpful when you want visual confirmation on automotive and HVAC systems.
• Fieldpiece DR82 IR Leak Detector – A complementary IR sniffer for numeric leak sizing and long sensor life.
• Nitrogen Regulator – Pressure test repairs before re-charge to avoid call-backs.

Instructions and Manuals

• Instructions
• Fliers