More durable than ordinary emulsion polishes, Jangro Wet Look Floor Polish provides a slip resistant, mirror finish to your floor.

This commercial polish is made with ultra high solids (25%), is a dri-bright emulsion floor polish that unlike some inferior products our professional use, Wet Look Floor Polish also contains excellent levelling properties for an even finish. Protects and prolongs the life of the floor surface, resists scuffing.

For use on vinyl, rubber, linoleum, marble, terrazzo and sealed floor surfaces.

Did you know one 5 litre container provides coverage for 400 square meters?

Pack size: 5 litre, Odour: Faint, pH: 8.6, Dilution: Ready to use.

Features & Benefits:

• Ultra high solids formulation for extra floor protection
• Excellent levelling properties for smoother application
• Slip resistant finish for a safer working environment
• Extremely scuff resistant to make it easier to clean & maintain
• Responds to high & ultra high speed burnishing
• Ideal for very heavy traffic areas
• Coverage per 5lt 400/500 sq. metres for 1 coat

How to polish wooden floors with Wet Look Floor Polish

1. Use undiluted
2. Pour polish into bucket or tray
3. Place mop or applicator into polish, lightly squeeze out surplus
4. Apply polish to dry floor thinly & evenly in WEST to EAST direction
5. Leave to dry for approximately 30 minutes
6. Apply a further coat of polish thinly & evenly at right angles to first, i.e. NORTH to SOUTH
7. Leave a 10cm gap at floor edge to avoid a build-up
8. Leave to dry for approximately 30 minutes

Further coats may be necessary dependent on the age, porosity of the floor & the type of maintenance system being used